MLW-6 Slurry Abrasion Tester

MLW-6 slurry abrasion tester is free abrasive wear testing machine, which is according to ISO 15527 <Plastics. Compression-moulded sheets of polyethylene (PEUHMW, PE-HD). Requirements and test methods>.  It uses an electric motor to rotate the sample, to drive abrasive materials such as mineral sand, sand, and alumina mixed with water to cause wear on various metal or non-metallic materials. During the rotation process of the sample, quartz sand and water wash and strike the surface of the sample, causing continuous loss of surface material. Through orthogonal experiments, from the perspective of experimental wear failure characteristics, the molecular weight of the material and molding process conditions are orthogonal experimental factors, Conduct experimental research on the wear performance of mortar, to conduct wear resistance tests on the material. And it is necessary to observe the morphology of the worn surface of the material under an electron microscope to explore the mortar wear pattern of the material.

Along with the enlargement of the application area of PE-UHMW material,People gradually discovered its shortcomings in use process. Such as low surface hardness, poor anti-wear ability shortcomings. In order to make it can be used in some occasion of higher requirements, VHMW - PE must be properly modified. The application of this equipment is to provide appropriate methods for modified products inspection on the wear rate.

This machine can simulate various working conditions well, and can be used for screening and testing wear-resistant materials in various industries such as agricultural machinery, construction machinery, mining machinery, mining machinery, transportation machinery, etc. in the laboratory. This machine can also lay a foundation for the research and development of abrasive wear mechanisms in scientific research departments.