1.Usages:
Q-2 metallographic sample cutting machine (hereinafter referred to as cutting machine)
is using high-speed rotation of the sheet to cut off metallographic sample; it is widely used
in a variety of metal materials cutting of the metallographic laboratory. Because of the cooling
device of this machine, it can take off the heat generated from the cutting, which avoids the
change its microstructure because of the sample being hot.
2.Technical parameters
2.1. The largest cutting area: Φ35mm
2.2. Wheel-chip specifications: 250*2*32mm
2.3. Rotating speed: 2860r/min
2.4. Motor: 1.1 Kw
2.5. Power: 380V, 50Hz
2.6. Size: 650*500*400mm
